Xinyu Kaiguang Rubber Co., Ltd.
Product Details
KG polymer cement waterproof mortar
Key Words
KG polymer cement waterproof mortar
Kaiguang Waterproof
Rubber waterproof
Classification
Cement-based waterproof material series
Product Details
Product Description:
KG polymer cement waterproof mortar is a one-component, dry powder material prepared by importing high-performance polymer dry powder, high-quality inorganic silicate materials and special additives.
Product features:
1. Strong bonding force and flexibility to prevent cracks, no hollowing, no cracking, no anti-alkali spitting.
2. Good workability, water retention and sagging resistance, large area construction, improve construction efficiency.
3. The coating is tough, with excellent water resistance, weather resistance and durability.
4. Tasteless, non-toxic, non-polluting, thin coating, less material consumption.
Scope of application
1. It is suitable for high-rise, multi-storey, medium and high-rise buildings such as exterior walls, kitchens, bathrooms, balconies, floors, windows, through-wall pipelines, floors, ports, docks, roads and bridges, pools, sewage treatment plants and civil buildings. Various required mortar acid, alkali and anti-corrosion projects.
2. It is suitable for the waterproof, anti-leakage, moisture-proof engineering of the exterior wall, basement, indoor toilet, balcony, etc. of the building, as well as the paste of various indoor and outdoor decorative materials. Especially suitable for acid resistance, alkali resistance, salt corrosion resistance or flexible requirements of the occasion.
3. It is suitable for waterproof of kitchen, toilet, balcony, or trench, etc., waterproof of swimming pool or reservoir, moisture-proof treatment before laying wood board on concrete base, waterproof of bridge deck, anti-corrosion and salt-proof protective layer of underground concrete surface.
Main technical indicators:
JC/T 984-2011
GB 55030-2022
| Test Items | Technical indicators | |
| setting time | Initial setting/min ≥ | 45 |
| Final setting/h ≤ | 24 | |
| Impermeability pressure/Mpa | Coated specimen, 7d ≥ | 0.4 |
| Mortar specimen, 7d ≥ | 0.8 | |
| Flexibility (lateral deformation)/mm ≥ | 1.0 | |
| Bond strength/Mpa,7d ≥ | 0.8 | |
| Test Items | Technical indicators |
| Impermeability pressure of mortar specimen (7d,Mpa) | ≥ 1.0 |
| Bond strength (7d,Mpa) | ≥ 1.0 |
| Frost resistance (25 times) | No cracking and peeling |
| Water absorption (%) | ≤ 4.0 |
Key points of construction
Basic requirements
1. Construction must be strictly in accordance with the design regulations.
2. Base surface treatment: the base surface is required to be smooth, clean, free of open water, floating ash, oil stain and hollowing. The surface of porous material shall be soaked with water in advance. The surface of steel base shall be cleaned of floating rust. The uneven and cracks shall be leveled first. The leakage shall be blocked first. The dry base surface shall be wetted with water before construction, but there shall be no accumulated water.
Method of use
1. First add water to the barrel, then add powder according to the proportion, mix the weight ratio of powder: water = 4:1 (depending on the construction environment), and use an electric mixer to fully stir until uniform and no agglomeration can be constructed.
2. Use a spatula to paint vertically and horizontally on the treated base surface, with an interval of about 3~4 hours for each passage. In order to avoid needle holes, the construction shall follow the principle of compatibility between the elevation first and the horizontal and vertical planes. Scrape at least twice during construction to avoid leakage and ensure waterproof effect.
3. The drying time of the coating is related to the ambient temperature, relative humidity of the air and other factors. If there are slight cracks on the surface of the coating after drying or the phenomenon of leakage during construction, it is only necessary to use this product to repair the defects.
Precautions
1. The prepared slurry should be used as soon as it is prepared. The prepared slurry should be used up within 2 hours to prevent it from being stiffened. The dried slurry cannot be reused with water.
2. The product shall be transported to prevent rain, exposure, freezing, extrusion and collision, and shall be stored in a dry, cool and ventilated warehouse at not less than 5 ℃.
3. The construction temperature of 5~35 ℃, try to avoid outdoor construction in high temperature, frost, direct sunlight or windy and rainy weather.
Reference Dosage
When the coating thickness is 1mm, the dosage is about 1.5~1.8kg/㎡
Packing specification
20 kg/bag
Previous article
Previous article
Recommend products
The company has a series of EPDM synthetic polymer membrane and waterproof coating, at the same time has a variety of superior performance of the rubber tube, widely used in modern industrial production.
Hotline:
Address: Banqiao Industrial Zone, Zhushan Town, Yushui District, Xinyu City, Jiangxi Province
Fax: 0790-6240098
E-mail:jxkgjc@163.com
(official number)
Hotline:
Address: Banqiao Industrial Zone, Zhushan Town, Yushui District, Xinyu City, Jiangxi Province
Fax: 0790-6240098
E-mail:jxkgjc@163.com